búsqueda de productos

Children's Indoor Obstacle Course

Selected range
5 configurable systems
Project area
100–300 m² (1,076–3,229 sq ft)
Target age
3–15 years
Marco
48 mm (1.89 in) galvanized steel pipe

From USD 15,000 / system

Request a Quote

Age-group planning connects crawl, balance, climbing, jumping, and transition zones with sightlines, circulation, and supervised operating rules. Five configured systems differ by floor area, activity mix, materials, and budget. Site dimensions and drawings support a configuration-based project quotation.

Activity Mix Planning Before Equipment Selection

Product List

Movement goals should lead component selection. A useful course alternates low-height crawl and balance tasks with progressive climbing, jumping or landing activities, then gives children clear transitions between them. Each challenge belongs with a target age and expected ability instead of a single route being treated as suitable for every child.

Crawl & Orient

Tunnels and low routes introduce simple direction changes and can serve as entry-level stations.

Balance & Transfer

Stepping, beam and bridge elements add controlled weight shifts, with queues and landings kept out of adjacent paths.

Climb & Traverse

Ladders, nets, platforms and overhead challenges need progressive difficulty, visible access and a planned descent.

Jump & Land

Higher-speed activity needs a defined use or fall area, a capacity rule and an operating supervision plan.

The pre-selection plan includes entrances, exits, circulation, caregiver and staff sightlines, age zones, waiting areas and conflicts between fast and quiet activities. Supervision supports the layout; it does not replace suitable equipment, cushioning, inspection or maintenance.

Five Configurable Course Systems Compared

Product List

The selected systems share a galvanized-steel frame and padded platform construction, while the project band and final activity mix differ.

ModelProject areaPlanning fitCommon constructionIndicative starting price*
Ninja Warrior MHD-1005100–200 m² (1,076–2,153 sq ft)A 100–200 m² ninja-warrior layout for varied climbing, balance and transition challenges.Galvanized steel; multilayer board; pearl cotton; PU/PVCFrom USD 18,000 / system
Ninja Warrior MHD-1003100–200 m² (1,076–2,153 sq ft)A 100–200 m² course option for a compact mix of climbing and active-play stations.Galvanized steel; multilayer board; pearl cotton; PU/PVCFrom USD 16,000 / system
Ninja Warrior MHD-1001100–200 m² (1,076–2,153 sq ft)A 100–200 m² starting point for a customized indoor active-play route.Galvanized steel; multilayer board; pearl cotton; PU/PVCFrom USD 15,000 / system
Indoor Playground MQA-1009200–300 m² (2,153–3,229 sq ft)The larger 200–300 m² option for broader activity zoning and circulation planning.Galvanized steel; multilayer board; pearl cotton; PU/PVCFrom USD 28,000 / system
Parque infantil de interior MQA-1018100–200 m² (1,076–2,153 sq ft)A 100–200 m² mix of baby-gym, jungle-gym and ninja-warrior play zones.Galvanized steel; multilayer board; pearl cotton; PU/PVCFrom USD 18,000 / system

*AI-estimated planning figures, not fixed offers. Final price depends on the approved floor plan, clear height, selected obstacles, finishes, quantity, destination, Incoterms and installation scope.

Product sources specify a 48 mm (1.89 in) galvanized-steel main frame with 1.5 mm (0.06 in) wall thickness, or 2 mm (0.08 in) above two levels. Typical platform construction uses 18 mm (0.71 in) multilayer board, 20 mm (0.79 in) pearl cotton and PVC covering, with PU used for other decorative coverings.

From Site Data to a Configured Quote

Product List
  1. Site survey. Send the floor boundary, usable dimensions, clear height, columns and beams, doors, freight access, exits, floor condition and available structure interfaces.
  2. Operating brief. Add target ages, desired crawl-balance-climb-jump mix, expected capacity, supervision approach, destination market and project-specific requirements.
  3. Configuration review. Mimuplay aligns a candidate model, activity zones, access and material options to the supplied drawing and brief, then confirms scope and specification.
  4. Quotation and delivery. Confirm price, production schedule, packing, shipping terms, installation responsibility, site readiness, inspection and handover documents before production.

Five Children's Indoor Obstacle Course Models

This selected range focuses on configurable commercial structures for indoor venues rather than loose household obstacle-course toys. The five systems share a padded galvanized-frame construction and differ mainly by project area, activity mix and the final site-specific layout.

Mimuplay Ninja Warrior MHD-1005 indoor obstacle course systemA 100–200 m² ninja-warrior layout for varied climbing, balance and transition challenges.

Ninja Warrior MHD-1005

A 100–200 m² ninja-warrior layout for varied climbing, balance and transition challenges.

  • Application / fitFEC, mall, indoor amusement, dining or education venue
  • Project area100–200 m² (1,076–2,153 sq ft)
  • MaterialGalvanized steel; multilayer board; pearl cotton; PU/PVC
  • Site interfaceCustom floor plan, clear height and site interfaces
Mimuplay Ninja Warrior MHD-1003 commercial indoor obstacle courseA 100–200 m² course option for a compact mix of climbing and active-play stations.

Ninja Warrior MHD-1003

A 100–200 m² course option for a compact mix of climbing and active-play stations.

  • Application / fitFEC, mall, indoor amusement, dining or education venue
  • Project area100–200 m² (1,076–2,153 sq ft)
  • MaterialGalvanized steel; multilayer board; pearl cotton; PU/PVC
  • Site interfaceCustom floor plan, clear height and site interfaces

Order, Production and Delivery Scope

Project offers become comparable only after the equipment, site inputs, destination and service responsibilities use the same basis.

Configured project order

MOQ: 1 configured system. The quotation is based on the approved layout, activity mix, finish, destination and installation scope.

Layout and specification review

Share a dimensioned floor plan and operating brief first; design scope and any engineering charges are confirmed in the quotation.

Component and finish samples

Material or color samples can be discussed before production. Availability, charge, freight and timing are confirmed per project.

Made to order: typically 25–35 days

Planning estimate after drawing approval and deposit; final schedule depends on configuration, order size and current production capacity.

Global project delivery

A comparable total landed-cost review includes destination, Incoterms, transport mode, unloading, storage and installation responsibilities.

Commercial Invoice, Packing List & Project Drawings

The agreed package can include commercial invoice, packing list, approved layout, installation information and model-linked inspection documents where applicable.

Send Your Floor Plan for Configuration Review

Upload a PDF, DWG, DXF, STEP, STP, JPG, JPEG or PNG file up to 10 MB. Include usable floor dimensions, clear height, columns, access, exits, target ages, preferred activities and required quantity so the team can review the configuration.

Useful project inputs

  • Usable floor dimensions and clear height
  • Columns, beams, doors, exits and access route
  • Target ages, preferred activities and capacity
  • Destination market, quantity and installation scope

Files are used to review this project request. Do not upload confidential material unless you are authorized to share it.

Questions Before You Confirm a Project

These answers support a more comparable model, price and delivery review.

Which model should I shortlist for my available floor area?

MQA-1009 is the larger 200–300 m² starting point. MHD-1005, MHD-1003, MHD-1001 and MQA-1018 are listed for 100–200 m². A final choice still requires clear height, columns, entrances, exits and the desired activity mix.

What determines the final children's indoor obstacle course price?

The displayed starting prices are planning estimates. Final pricing depends on the approved layout, equipment height, selected activities, finish, quantity, packing, destination, Incoterms and whether installation or site work is included.

Can I review materials or colors before production?

Ask for the available component, covering or finish samples during specification review. The team confirms the exact sample, charge, freight and timing for the project before you rely on it for approval.

What certificates or inspection documents should I request?

Request documents that identify the selected model or sample, applicable standard and version, test date, scope and result. A generic certificate image should not be treated as proof for every model or customized configuration.

What must be ready before installation?

Before dispatch, the confirmed plan should cover the equipment access route, temporary storage, floor and structure interfaces, site power, work-zone isolation, coordination with other contractors, inspection responsibility and agreed handover records.

Request a Layout-Based Project Quote

Share your site, target ages, activity mix and project scope for a configuration review.

By submitting, you consent to Mimuplay using these details to respond to your project inquiry.